Q: Are the batteries included?
A:
The six standard “D” size batteries that are required to
operate this Sensaphone during power failure are not included.
Q: What conditions can be monitored right out of the box?
A: Everything you need to monitor power, temperature and sound are
included with this Sensaphone. The temperature sensor will report
the exact temperature wherever the Sensaphone is located. To measure
the temperature at a different nearby location, the Remote Temperature
Sensor is available (sold separately).
Q: What’s the difference between 1104 & 1108?
A: The Sensaphone 1104 and 1108 are similar in operate. The 1104
allows connection of up to four sensors (including the temperature
sensor which comes with the unit) as well as calls up to four people
or pagers. The 1108 allows attachment of up to eight sensors and
calls eight people or pagers.
Q: Can I run this off a 12V battery?
A: This Sensaphone includes a 110VAC power supply which supplies
a controlled low-voltage AC supply to the Sensaphone. If your requirements
demand 12V DC operation, please contact our Technical Support department
for specific information regarding DC operation of our products.
Q: Can this be used with digital phone line?
A: All of our Sensaphone products require attachment to a standard
telephone line that would support a fax, modem or any analog telephone. If your office uses a PBX with digital phones, simply have a fax line installed for the Sensaphone.
Q: Can this product speak a foreign language?
A: This Sensaphone will offer status reports and alarm reports in
English language only. If you require a specific language, a more
advanced Sensaphone may be for you. Contact one of our Sales Associates
for assistance in determining which Sensaphone will accommodate
your language needs.
Q: Can I install a desktop AutoDialer directly into a greenhouse
or barn?
A: Yes. This Sensaphone is ideal for use in just about any application.
However, when using a Sensaphone in any environment that is subject
to moisture, or outdoor conditions, care should be used when locating
the unit. Often, one of the higher-end Sensaphone models may be
better suited for this environment, which include a NEMA watertight
enclosure. Contact a Sensaphone Sales Associate to discuss your
specific application further.
Q: Which applications are the line seizure models best suited
for?
A: The Sensaphone 1104 and 1108 are available in a version that
supports Line Seizure. Line Seizure means that when the Sensaphone
needs to make an important alarm call, it will hang up (disconnect)
anybody else from using the telephone line so that a clear line
is available for use by the Sensaphone. This is important if you
need 100% ability delivery of the alarm message. But not all applications
require the line seizure model. If you intend to share the same
telephone line that the Sensaphone is going to use with other systems
or people, you will want to use the line seizure model. The Sensaphone
must be the first ‘device’ on the telephone line and
the other devices plug into the Sensaphone.
Q: What’s the max length of wire I can use between
the AutoDialer and the sensor?
A: This Sensaphone can support sensors as far away as 1,000’.
All that is required is either category-3 (standard telephone) wire
or category-5 (computer wire). You may also use any wire which is
between 18g and 24g.
Q: Can a desktop AutoDialer be used in Europe?
A: Yes. Many of our Sensaphone systems can operate in just about
any country. The Desktop models are available with several power
options for 220V 50Hz.
Q: Can Sensaphone share the phone line with another phone
or device?
A: Yes. If you have a telephone answering machine attached to your
telephone line, the Sensaphone can be instructed to allow you to
call into your Sensaphone without having the answering machine answer
the telephone call.
Q: Is there a monthly fee involved?
A: No. There are never any monthly fees for monitoring with a Sensaphone
system. With a Sensaphone, you own the monitoring system and control
who and where the any alert calls go.
Q: Do I need to hire a professional to install?
A: No. The Sensaphone Desktop models are very easy to setup and
program. Generally, setup can be completed in as little as 10 minutes.
But if you have special requirements such as unique wiring needs
or special sensors, you may wish to enlist the assistance of an
installer. Just about anybody whose job is to handle low voltage
wiring can assist in the installation of sensors and wiring. If
you are unsure if your application will require special installation,
contact our Technical Support department and they can assist you
in determining how much installation may or may not be required.
|
