Sensaphone AutoDialer model 800 Specs Page
power and temperature alarm
Sensaphone Model 800 Features and Specifications
(new replacement for the 1108 and CottageSitter)
800
sensaphone 400
sensaphone 400
sensaphone sensaphone back dimensions
 
Image Viewer
  
 

Features of the NEW Model 800 AutoDialer

  • 8 inputs for monitoring temperature(s), Water Monitors, motion sensors, door alarms, humidity etc.
  • Calls up to 8 phone numbers when a problem occurs.
  • Relay output for activating a siren, strobe, pump or any electrically controlled device.
  • security code access.
  • Temperature and Power monitoring to protect protect freezers, refrigerators, frozen pipes, frost damage etc.
  • Call your 800 using any telephone, to receive status reports and listen-in to on-site sounds.
  • Detects problems before they are disasters.


 
8 INPUTS:
arrw
Inputs automatically configure for :
Temperature sensors: -20°F to 150°F
Normally Open(NO) or Normally Closed (NC) contacts
arrw
Automatic input configuration.
arrw
Each input has programmable recognition time.
arrw
Keypad entered internal calibration.
 
VOICE MESSAGES:
arrw
Spoken English vocabulary is built-in for programming and sensor read-outs.
arrw
Custom messages are recordable in your own voice to describe each condition.
arrw
Site identification may be recorded.
ALARM NOTIFICATION:
arrw
WIll dial up to eight phone numbers.
arrw
Calls with recordable messages to quickly determine problem.
arrw
Alarm test function to simulate and test the notification process.
arrw
Line Seizure is included.
REMOTE ACCESS:
arrw
Use any Touch-Tone phone call-in and check the status of all monitored conditions.
arrw
Make programming changes remotely from any Touch-Tone phone.
arrw
Control the output relay remotely from any Touch-Tone phone
MICROPHONE:
arrw
 		 Monitor high sound alarms such as sirens, smoke alarms, failing equipment etc.
arrw
Call the Sensaphone 800 to listen in to the monitored area.
arrw
Internal microphone for the recording of custom voice messages.
LOCAL ACCESS:
arrw
Intuitive keypad and speaker makes local programming simple.
arrw
Voice prompts you through programming steps.
arrw
Password-protected programming to prevent abuse.
COMPATIBILITY:
arrw
The Sensaphone 800 is a direct replacement for the model FGD1108 and 1108 CottageSitter.
POWER SUPPLY:
arrw
Equipped with plug-in power supply.
arrw
24 Hour battery backup using 6 size C alkaline batteries (not included).
arrw
Automatically monitors for power failure alarms.
arrw
International power options available.
OUTPUT RELAY:
arrw
Normally Open and Normally Closed low voltage output relay included.
arrw
Relay be controlled remotely or upon an alarm condition.
BUILT-IN CottageSitter CONTROL:
arrw
The built in relay can be used to remotely change the temperature of a dual setback
thermostat or switch between two standard thermosats.
 
Sensaphone Model 800 (new replacement for the 1108)
Size: 71⁄2" W, 2" H, 81⁄2" D
Shipping Weight: 4 lbs.
Batteries: (6) 1.5 Volt "C" cell alkaline (not included).
Telephone Connection: FCC approved RJ-11 plug-in modular connector with 6' cord.
Operating Temperature Range: Unit should be kept between 32° F and 120° F.
Temperature Sensing Range: -20º F to 150º F with remote temperature sensor.
NRTL listed for compliance with U.L. Standard 60950-1.
Other popular Models to choose from.
new Model 400 Replaces the 1104, 1114, 1104 CottageSitter, 1104 RC and 1104 BS !!
new
Model 800 Replaces the 1108, 1118, 1108 CottageSitter, 1108 RC and 1108 BS !!
 
Model 1400 Advanced Features in a NEMA4X enclosure. 4 Inputs
 
Model 1800 8 Inputs in a NEMA4X enclosure with alpha numeric paging and web posting!
 
Model 2000 With email, fax, data logging capability
 
ExpressII Expandable to 40 channels, built in Gel Cell
 
StationSitter Robust pump controller and AutoDialer
 
Scada 3000 Fully integrated control system
Sensaphone 800 Specifications
About Us Contact Us Privacy Policy Dealers Downloads Surplus Items Satisfaction Testimonials Returns