Specifications:

• Switch is U.L. listed.
• 1 Amp Max at 24 VDC.
• Recommended < 250ma.
• 24 inch lead wires (20 AWG)
• Operating temperature not to exceed 90 deg. Celsius.

Installation:

• Mount float slightly above point where the water level activates the sump pump.
• Connect electrical leads to the applicable circuit.
• Use of a water-tight splice is recommended.
• Test to insure proper operation.
• To change circuit from N.C. to N.O., remove "C" clip, reverse float, reinstall "C" clip.
• When connecting to an inductive load an arc suppression device should be put in parallel with the load to avoid damaging the switch.

Features:

• Low cost.
• Simple construction.
• High reliability design.
• Made of non-corroding plastic materials.
• Stainless steel hose clamp for easy mounting.
• Sealed reed switch provides high isolation when pump wiring breaks down.
• Will operate totally submerged.
• Unique reversible float allows for N.O. or N.C. switch circuit.
• Fits virtually all sizes and types of return pipes.