WaterBug® model WB350...Electronic Water Monitor
The model WB-350 operates on a standard 9-volt battery (not included) and has an open collector output that can be connected to alarm panels and some AutoDialers. The unit can monitor up to as many as six sensors up to hundreds of feet away, depending on the wire used. Each sensor has surface contacts that detect the first appearance of water forming a film on the floor. The sensor will not alarm due to condensation or high humidity. One standard surface sensor is included with the unit.

Features:
  • Economical 9-volt battery power for operation. Approx. 1-year life with low battery warning beep.
  • No false alarms due to condensation or humidity
  • Can monitor up to 6 sensor probes -hundreds of feet away
  • Provides (1) form open collector output for alarm for use with AutoDialers and alarm panels.
  • Easy surface mount installation
  • One year parts and labor; subject to conditions of limited warranty.
WaterBug model WB350
model WB350

model WB350 $65 US$
buy_on_line

Typical Applications:
  • Residential or Vacation Homes
  • Basement Sump Pumps
  • Commercial Buildings
  • Office and Computer Areas
  • Unattended Buildings
  • Greenhouses & Animal Buildings
  • All Drain Areas
  • Sprinkler Systems

  • Accessory Options:
    • Standard surface sensor - model WB1040
    • Under carpet sensor - model WB1041
    • 9 volt battery (not included)

    WB200 Dimensions Dimensions Dimensions
     
    Product Viewer
     
     
     
    WaterBug 350 Accessories
    WaterBug wb1040

    WaterBug WB1040 Additional Standard Surface Sensor may be placed on the floor to detect the first appearance of leaking water, or attached to your sump pipe to detect water rising. Works with all models.

    model WB1040 Just
    $24 US$ buy_on_line
    WaterBug wb1041
    WaterBug WB1041 Additional Under-Carpet Sensor may be placed under carpet or raised flooring to detect the first appearance of leaking water. Works with all models.

    model WB1041 Just
    $29 US$ buy_on_line

    SPECIFICATION

    VALUE FOR WB-350

    Console Size

    5" x 2.44" x 1.25" (12.7 cm x 6.2 cm x 3.18 cm)

    Probe Size (standard P/N #1040)

    2" x 3" x 0.88" (5.1 cm x 7.6 cm x 2.2 cm)

    Probe Size (under carpet P/N #1041)

    2" x 3" x 0.18" (5.1 cm x 7.6 cm x 0.5 cm)

    Power Requirements (resting state)

    9V battery @ 1.8 micro amps

    Power Requirements (alarm condition)

    9V battery @ 380 micro amps

    Approximate Battery Life

    1 Year

    Sensitivity

    Will not alarm due to high humidity or condensation

    Operating Temperature

    Control and Probe 32° to +140° F (0° to +60° C)

    Outputs

    Open collector max. to tripline- 30VDC

     

    Recommended Dist. Between Probes & Console

    1-2 probes: 200ft (61 m) max. 3 or more probes: 500ft per probe

    Recommended Max. Probes Per Console

    6


    About Us Contact Us Privacy Policy Dealers Downloads Surplus Items Satisfaction Testimonials Returns